Cliniclands - Katana Family - Kuraray Noritake

STML

YML

THE FIRST CHOICE FOR CROWNS AND UP TO 3-UNIT BRIDGES

THE STATE-OF-THE-ART ALLROUNDER

KATANA ™ Zirconia YML Long and complex geometries require the ultimate in strength, monolithic aesthetics and an ultra-high incisal translucency. For many years these properties were mutually exclusive, but they no longer are. With its strong body and highly translucent enamel layer, KATANA ™ Zirconia YML offers the properties needed for a wide indication range. It is based on a new multi-layer technology featuring newly developed zirconia raw materials with different yttria concentrations integrated into a four-layer colour structure. The result is a chroma, translucency and flexural strength gradation with a seamless structure that allows to produce high-quality, lifelike restorations – including monolithic long-span bridges. Recommended finishing method Monolithic design + ultra-micro-layering with CERABIEN ™ ZR FC Paste Stain Alternative finishing method Vestibular cutback (0.3 mm) + micro-layering

KATANA ™ Zirconia STML In order to produce a beautiful monolithic restoration, the materials used need to have a medium-to-high flexural strength and varying levels of translucency in the incisal and cervical area. This is because a lot of light is transmitted in the enamel area, while the colour of the underlying tooth structure should not be revealed. KATANA ™ Zirconia STML, with its mainly cubic formulation, offers the perfectly balanced solution. Recommended finishing method Monolithic design + ultra-micro-layering with CERABIEN ™ ZR FC Paste Stain Alternative finishing method Vestibular cutback (0.3 mm) + micro-layering

Recommended applications Anterior crowns and up to 3-unit bridges Posterior crowns and up to 3-unit bridges Additional applications Inlays, onlays Veneers

Recommended applications Full-arch restorations Long- and short-span bridges Anterior and posterior crowns Frameworks Additional applications Inlays, onlays Veneers

Minimum wall thickness Minimum connector cross section

Minimum wall thickness

Minimum connector cross section

Veneer

0.4 mm 0.8 mm 1.0 mm 1.0 mm 0.8 mm 1.0 mm

- - - -

Veneer

0.4 mm 0.4 mm 1.0 mm 0.5 mm 0.4 mm 0.4 mm 0.5 mm

- - - -

Anterior crown

Inlay/onlay

Posterior crown

Anterior 2- or 3-unit bridges Posterior 2- or 3-unit bridges

12 mm 2 16 mm 2

Anterior 2- or 3-unit bridges

7 mm 2 9 mm 2 9 mm 2

Anterior long-span bridge (more than 4 units)

Posterior bridge

Flexural Strength 750 MPa 1,000 MPa 1,100 Mpa

Translucency Flexural Strength 49% 748 MPa

All light transmittance, illuminant: D65, Thickness of sample: 1.0mm. White-color zirconia (base material) is used as testing material. Source: Kuraray Noritake Dental Inc. Three point bending test according to ISO 6872:2015 - sample size 3 x 4 x 40 mm. Source: Kuraray Noritake Dental Inc.

Translucency

Enamel Body 1

49% 47%

Body 2/3 45%

Available disc thickness: 14mm, 18mm and 22mm

kuraraynoritake.eu